I am wondering if anyone knows a way to do some kind of recursive label edit...
Using file-based PlantSpace XM, and we just had a revision to our line list. I am wondering if anyone knows a way to do some kind of recursive label edit that would update all the labels on all the...
View ArticleATDB0719: Relationship Manager error code report -2147217887
Trying to place a component in a AutoPLANT Piping Model.ATDB0719: Relationship Manager error code report -2147217887Microsfot JET Database Engine: Could not update; currently locked.
View ArticleI need help creatin an angled pressure relief valve (inlet DN25 CL300 -...
I need help creating an angled pressure relief valve (inlet DN25 CL300 - outlet DN50 CL150) I can get it to show and connect at the DN25 end but not the DN50 end any help would be apreciated.I have...
View ArticleClik here to view.
Changing the display of fasteners in AutoPLANT Modeler SS4
Problem:When modelling the fasteners display as a line with a circle on the end. I want them to be al circle with the centre at the centre of the gasket.Where and how do I achieve this?
View ArticleHow to isolate piping 3D model by line number?
Hi Bentley,1) I want to isolate piping by line number, one method that i know is to isolate the piping using turn on/off layer. Is there any method to isolate the piping by line number?The method that...
View ArticleClik here to view.
OPIM - Symbol rotation
Symbols have different rotations in same branch looks little bit strange. Is it any setting I can do?Thanks,Maggie
View ArticleClik here to view.
OPIM - How many Maximum No Of Lines in BOM
HI,I am trying to find how many maximum no of lines BOM may have, as it starts with node 60, where it may ends??Please help for the same.Regards,Vivek
View ArticleClik here to view.
AP OPIM - Multiline control valve tag
I tried to display control valve tag in ISO image and it did. However, it displayed as one line instead of multi-lines. Can someone help?Thanks,Maggie
View ArticleBuilt own piping spec/class
Hii Bentley,I'm using Bentley Autoplant 3D SS5. I have one piping spec/class received from client (japan company). So i need to built my own piping spec/class based on client piping spec/class.The...
View ArticleOpenPlant Orthoographics Manager V8i SS5 install issue
Hi all, I'm seeing an install failure with Orthographics Manager, message window pops up, 'OpenPlant Modeler V8i Workspace path does not exsits. Please fix the issue and rerun the Setup.OpenPlant...
View ArticleClik here to view.
AP OPIM - String operation/function in OPIM expression
We place out-of-spec components in a seperated spec database file. However, we don't want to see spec break in ISO between regular spec and oos spec. I tried to use string replace function on IE_SPEC...
View ArticleProjectWise Logical Set Update KeyIn
HI Guys,Any idea for a key in of Logical set Update, I come to know about variable for skipping it, but really looking for a key in entry for it.Please reply for any ideas, Regards,Vivek
View ArticleClik here to view.
AP OPIM - Bolt length in BOM
It looks like the bolt length has some length sensitive, some length can output as inches, and some not - remaining in mm. Anything I can do on this?Thanks,Maggie
View ArticleClik here to view.
Specgen problem: mm_jis_jpi fittings list not appear in specgen
Hi Bentley,I'm new user for autoplant 3d ss5. I'm having problem with specgen. i'm using mm_jis_jpi spec for JIS std. I want to view the mm_jis_jpi fitting item in specgen but the item not appear...
View ArticlePLANTSPACE XM rimref not found, error reading label, mdl command psmenu_cmd...
Hello everyone,i'm an on-site support guy who prepares and fix PCs for bentley users in Fincantieri. I do not personally use any of the Bentley software, so I apologize if my question is dumb or my...
View ArticleClik here to view.
AP OPIM - Tapped point of bleed ring in ISO
Hi,When I ran ISO on a bleed ring with tap port, the tapping point show in middle of bleed ring symbol instead of edge of bleed right. Is any settings I can set to make it show properly?Also why bleed...
View ArticleAP OPIM - Valve operator spindle direction?
I am trying to show valve operator spindle direction, but I cannot find the setting. I tried to enable valve operator label, but it only shows operator name, like "HAND_WHEEL" (expecting SPINDLE NORTH...
View ArticleField Weld issues with OPIM
i have 2 problems with field welds using OPIM.Following these instructions communities.bentley.com/.../19833.how-to-add-weld-tag-for-field-weld-ffw-show-on-isometric labels both field welds and field...
View ArticleHow to replace already available attributes of the pipeline line by means of...
In program module of OpenPlantModelerV8i (Select5) the openplantmodeler import PIPING_NETWORK_SYSTEM function allowing to import attributes of the pipeline line from the file of the .txt format is put....
View Article