When I logged to Open Plant Model Server, the adapter name field shows '' No OPMS Adapter Type Available" warning whereas others are able to see the adapter name in their workstation. Please find the below screenshot highlighted with the warning for your reference.
Suggest or help us in resolving this.
Thanks and regards,
Pushpakar
Dear i am a new user of Open Plant
i want to edit a existing specification specially material grads.
as shown in below screen shot these Material Grade and trim # fields are not editable please help.
In existing Material grade is A105 but i want to change it with P11, SS-304 etc
same is the case with pipes and fittings.
when I insert the component lap joint stub end , the following error appears:
Is it possible to have the same components on each Isometric drawing numbered the same?
Eg.
----------------------------------------------------------
SHOP MATERIALS
----------------------------------------------------------
-----------
PIPES
-----------
1 7891 PIPE, 168.3mm x 7.11mm W.T., ASTM_A333_GR_6, SMLS, BARE
-----------
FITTINGS
-----------
2 1 TEE, 168.3mm OD, STD, WELD, ASTM_A420_WPL6
3 5 FLANGE, 168.3mm OD, ANSI 600, WNRF,STD, ASTM_A350_LF2_CL1
4 2 ELBOW, 168.3mm OD, STD, WELD, LR, 90 DEGREE, ASTM_A420_WPL6
5 2 THREADOLET, 26.7mm OD ON 168.3mm OD, CLASS 3000, NPT, ASTM_A350_LF2_CL1
is it possible to have PIPE, 168.3mm x 7.11mm W.T., ASTM_A333_GR_6, SMLS, BARE always be number 1,
and ELBOW, 168.3mm OD, STD, WELD, LR, 90 DEGREE, ASTM_A420_WPL6 always be number 4, etc.
on each sequential isometric sheet?
Further, Spool numbers and Weld numbers always start at 1 on each isometric sheet. Is it possible to have them continue in sequence onto the next isometric sheets?
Eg.
Spool 1 to 5 is on Isometric 1
Spool 6 to 10 is on Isometric 2
etc.
as well as
Weld 1 to 15 on Isometric 1
Weld 16 to 24 on Isometric 2
etc.
Opentplant Modeler - 08.11.09.568
Openplant Isometric Manager - 08.11.09.564
Thank you for your help,
Brynn Paluck
Hello, colleagues,
I have problem with Bentley OpenPlant Modeler V8i startup. I got an error (see picture) and i can't work normaly. I need help. Maybe know what is wrong and what I need to do?
Hi,
I'm struggling a bit to make a regular expression (in schema) work and I suspect that I'm not using the right format for my regex. Does someone know the regex "flavor" that OPPID is supporting? JGsoft, .NET, Java, Perl, etc. ?
Regards
Alain
Hello to the OpenPlant community!
I'm looking to export a structure I've built in OpenPlant Modeler to Integrated Structural Modeling (ISM) using the Create Repository function in OpenPlant.
I get the error "The ISM_ENGINE_PATH configuration variable is set to a non-existent application. Please update the configuration variable in config\appl\StructuralModelingComponents.cfg. The ISM Import and Export features require this setting".
I've downloaded Structural Synchronizer, closed OpenPlant and tried again. Same message.
I changed the ISM_ENGINE_PATH configuration variable path in OpenPlant by Help -> Key-in Browser -> mdl silentload CFGVARS -> ISM_ENGINE_PATH to "C:\Program Files\Bentley\Engineering\Structural Synchronizer CONNECT Edition\Synchronizer\StructuralSynchronizer.exe" - what the path to the Structural Synchronizer application is on my PC - but I received the same message again.
I confirmed this change of path with the configuration file in C:\ProgramData\Bentley\OpenPlantModeler V8i\WorkSpace\Users\OPModeler.ucf" which states: "ISM_ENGINE_PATH = C:/Program Files/Bentley/Engineering/Structural Synchronizer CONNECT Edition/Synchronizer/StructuralSynchronizer.exe" - the same as I changed it to in OpenPlant.
When I copy and paste the ISM_ENGINE_PATH file in my Windows Explorer it opens Structural Synchronizer as expected, so I know it's the correct path.
I have OpenPlant Modeler V8i (SELECTseries 6) Version 08.11.11.225 and Structural Synchronizer CONNECT Edition Update 2 Version 10.02.00.140.
Has anyone encountered this issue? I'm out of ideas for why this isn't working.
Thanks in advance and happy Friday!
Cheers,
Thomas
Hello All,
I found the only way to update OPPID pipeline label is to browse and select new pipeline tag, otherwise the existing old pipeline label won't update, and if place new label, the old tag number shows still. Is it a bug? For equipment, if I revise the area/service, the equipment label will be updated immediately.
Another problem, if I updated the piping tag, the piperun won't updated automaticlly. The piperun label is not same as pipeline label. Can it be fixed?
Thanks a lot!
Hi Everyone,
I'm searching the Communities for some information on defining additional end preps \ fittings as automatic spool breaks when generating an isometric? The application comes with FLANGED end prep as predefined; we would like to add cam and groove couplings.
OPM - 306
OPIM - 285
Thanks,
Dave
Hi All,
Anyone know what happened to the ROATE_Z variable within OPIM? This was present in the old IsoExtractor and used extensively to produce more legible isometrics by avoiding the requirement of hatched dimensions on skewed lines.
Without this variable, how do we achieve the required outcome in OPIM?
POM - 306
OPIM - 285
Thanks for you help,
Dave
Hello All,
So it is possible that pipeline/piperun/label are not consistent, and it is hard to check. I'd like to know if any way to check such problem. If MVBA can achieve it, it would be better. Thanks a lot!
Anybody know what happened to these ODBC drivers? As this link not working.
Hi,
i want to add additional steel reference data to the OPSE database.
What are the refProfileDescript, refProfileProperty parameter and the section name for the base plate.
i want use base plate whit the Extrusion Profile Tool (if possible).
Best regards, Salim
How can I disable the function Repairing Joints when I attach or refresh a 
reference.
We would like the ability to filter our component selection with the Specification, Pipe Diameter, and also the Pipe Schedule. We have managed to add the Schedule property to the standard preferences tool bar but the drop down list is not showing the list of schedules in our specifications.
We would like to be able to filter out STD, or Schedule 10, etc.
This is what the class editor looks like.
OPM version 08.11.09.568
Brynn Paluck
Hi
I recently installed AutoPLANT SS7 refresh 2 (8.11.12.252) and figured that the PCF export function is gone. (I don't OPIM can export a pcf file, but we want to call ebs scripts and get previous customization). Now I am trying to uninstall AutoPLANT Modeler and it popup a message "Invalid Drive: D:\"
Any walk around to remove this refresh 2 version?
Thanks,
Maggie
Hi!
I have two questions and would really appreciate if someone could answer them.
1, Is it possible to connect a pipeline to an equipment without nozzle and flange? I have a lot of these situations and couldn't find a way to create the logic between the two elements.
2, Why is OPM forcing me to use weld neck flanges? If I place a slip on flange onto a pipe, the software places the appropriate weld neck flange on the other side, then continues with placing an other weld neck flange. So I end up with a weld neck flange connection and one slip on flange inside it.
Best Regards,
Csaba Szabó
I am generating an isometric in autoplant and I can not find a way to hide the lines in the isometrics. It generates them in this way:
![]()
Hi,
We're trying create/use assemblies that have non intelligent graphics. For example, text elements. Creating the assemblies in not a problem but when inserting one is creating multiple copies (3) of all non intelligent graphics. In the picture below, text "CONCENTRATE" and material lines in blue are all inserted 3 times even if they exist only once in the assembly. Any idea how to get this right?
Best regards
Alain
老师，您好！
我在OPSE使用过程中，在给管道添加悬臂支架以及含支撑的悬臂支架的时候，选择管道和结构之后，
悬臂支架以及支撑悬臂支架的生根位置不在管道和结构之间，而是在相对的方向，具体见附图，
请问老师这应该怎么解决？
此致
敬礼
许可
2018.04.13
